Qingdao Yijiaan Industry And Trade Co.,Ltd

Qingdao Yijiaan Industry And Trade Co.,Ltd
Products

Steelless and carbon plate bending machine

Steelless and carbon plate bending machine

Product name:Steelless and carbon plate bending machine

Item:QTBM-6000

Details:

1. Overview of the main body

The machine is hydraulic three-roll bending machine for rolling a steel plate into a cylindrical shape at a normal temperature.

The upper roller moves vertically and the rotation is passive.

When spheronizing, the two lower rollers are driven by a motor and a speed reducer.

Since the elevation of the lower roll is constant, it is easy to feed and operate.

With PLC control, the roller displacement is digitally displayed.

Provide detailed electrical schematic diagrams. The electrical wiring shall be strictly in accordance with the drawings. The numbers at both ends of each connection shall be clear and complete. The line terminal shall be marked with the same line number as the connection number, and shall be in the electrical wiring diagram. And the schematic diagram is marked accordingly;

The electrical components used in the equipment are all made of high-quality products with famous brands. Electrical protection devices (such as current relays, air switches, etc.) must be strictly tested before installation and ensure reliable operation.

The hydraulic components used in the equipment are made by Yuci Oil Research.

The equipment runs smoothly, has flexible control, no jamming, oil leakage and abnormal noise.

The surface of the paint must be flat and bright, the thickness of the paint is uniform, and there are no defects such as leakage and so on.

The overturning frame is hydraulically tipped over and has a faster speed.

The vertical displacement of the upper roller is hydraulically driven and the speed is faster.

The equipment has high reliability and low failure rate.


2, main technical parameters

Maximum coil thickness: 10 mm

Maximum coil width: 6000 mm(can be designed as your requirement)

Full load minimum coil diameter: Φmin700mm

Plate yield limit :σs≤245M pa

Upper roll diameter: Φ400mm

Lower roll diameter :Φ190mm

Units of rollers: 2

Number of rollers: 8

Upper roller pressurization speed :about 130mm/min

 Coil speed: about 4 m/min

 Main motor: 15KW

 Hydraulic motor :5.5KW


←[Previous:QTBM-9000]

Related Products :

Corrugated plate press machine

QTCP-3000
Corrugated plate press machine

Steelless and carbon plate connecting machine

QTBM-9000
Steelless and carbon plate connecting machine
Home   |    About Us   |    Products   |    News   |    FAQ   |    Feedback   |    Contact Us   |    Service   |    SiteMap
Copyright (c) 2019 Qingdao Yijiaan Industry And Trade Co.,Ltd All Rights Reserved Mobile column car/bus/truck lift introduction and using scope