Qingdao Yijiaan Industry And Trade Co.,Ltd

Qingdao Yijiaan Industry And Trade Co.,Ltd
News

Precautions and installation for the hydraulic four post car lift

Author:Martin Chen Date:8/9/2019 10:48:36 PM

Precautions and installation for the hydraulic four post car lift


 Precautions

1.1 Its strictly prohibited to walk under the lifter when its going up and down.

1.2 Its not recommended to raise the lifter to the limit of the height to avoid excessive pressure at pump station.

1.3 All the things under the tray must be cleared off before the vehicle goes down.

1.4 The safety claw clips must be secured when servicing the vehicle.

1.5 Keep the working environment clean.

1.6 Add grease at the lubrication points at least once every week.

1.7 The user should contact the dealer or manufacturer at once for specialists for any problems that he cant solve.

2. Installation:

The installation steps as follows:

2.1 The equipment should be installed on vibration-free and solid concrete foundation.

2.2 Fix the tray and lifting beam with M10 bo1ts. (Also see External Dimensional Structure Diagram)

2.3 Fix four posts onto the floor with M16 expansion bo1ts and posts should be kept vertical (Also see External Dimensional Structure Diagram)

2.4 Fix the transmission beam onto the top of posts with M14 bo1ts and nuts. (Also see transmission Beam Installation Diagram)

2.5 Connect the chain.

2.6 Fix the hydraulic station on the back of a post, and connect the oil pile. Fill up the oil tank with 30# hydraulic oil.

2.7 Apply lubrication grease on chain and rollers.

Home   |    About Us   |    Products   |    News   |    FAQ   |    Feedback   |    Contact Us   |    Service   |    SiteMap
Copyright (c) 2019 Qingdao Yijiaan Industry And Trade Co.,Ltd All Rights Reserved